How to Master Lawn Mower Maintenance


How to Master Lawn Mower Maintenance. If that old lawn mower has been neglected
a little too long, this guide will have it purring like a kitten in no time. You will need Owner’s manual Replacement parts
Wrench Gloves Cleaning brush Putty knife Bench grinder Electric hand tool Grinding or sharpening
attachment Fresh oil and spray lubricant. Step 1. Consult the owner’s manual for specific maintenance
suggestions, warnings, or tips. Step 2. Have replacement belts, spark plugs, blades,
and filters for your mower on hand. Step 3. Replace the spark plug at least once a year. Spark plugs often need replacing due to stale
fuel. Leave the spark plug cable detached to prevent
an accidental startup while you work. Step 4. Wear work gloves and clean under the cutting
deck with a stiff cleaning brush and a putty knife to remove debris. Step 5. Sharpen the blade on a bench grinder or with
an electric hand tool and a sharpening attachment every year. Grind or file the blade as evenly as possible
to prevent an imbalance and stress on the drive shaft and follow the manufacturer’s
bevel. Step 6. Replace the air and fuel filters to improve
engine efficiency and check belts for cracks or wear. Step 7. Change the mower’s oil and apply spray lubricant
to moving parts before reconnecting the spark plug cable and starting the engine. Did you know The U.S. Lawn Mower Race Association
holds nationwide competitions in which modified lawn mowers typically reach speeds of 85 miles
per hour.

3 comments on “How to Master Lawn Mower Maintenance”

  1. SpencerLives says:

    psh….instructions and warnings are for sissies….*cuts off finger*

  2. Сергей Мурашкин says:

    I have a small lawn and this works perfectly.>>>t.co/3MgR6YCaH9   Much easier to start, quieter, and less smelly than a gas-powered lawn mower. It is smaller and not a powerful as a gas mower, but for what I need, it is perfect. I got the heavy-duty cord as others have said, and had no problems at all

Leave a Reply

Your email address will not be published. Required fields are marked *